Saludos amigos y amigas recién me estoy iniciando en GNU/Linux y he decidido compilar mi kernel con un tutorial de ubuntu.org, estoy hablando de un pentium III con 750mhz y 382 de ram al cual le instale edubuntu 6.06 y actualice a edubuntu 8.04, tarda un poco en arrancar pero una vez todo corre excelente, el problema es que al compilar el kernel no tengo audio (No se han encontrado complementos o dispositivos control de volumen de GStreamer) las demás aplicaciones corren perfectamente.

Esta es la informacion de arranque

root@gpersua-desktop:~# dmesg
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24.3.22082008 (root@gpersua-desktop) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Fri Aug 22 17:01:54 VET 2008 (Ubuntu 2.6.24-19.36-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000011ff0000 (usable)
[ 0.000000] BIOS-e820: 0000000011ff0000 - 0000000011ff8000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000011ff8000 - 0000000012000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 287MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 73712) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 73712
[ 0.000000] HighMem 73712 -> 73712
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 73712
[ 0.000000] On node 0 totalpages: 73712
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 543 pages used for memmap
[ 0.000000] Normal zone: 69073 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FC050 checksum 0
[ 0.000000] ACPI: RSDP 000FC050, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 11FF0000, 0028 (r1 AMIINT AMIINT10 1000 MSFT 100000B)
[ 0.000000] ACPI: FACP 11FF0030, 0074 (r1 AMIINT AMIINT10 1000 MSFT 100000B)
[ 0.000000] ACPI: DSDT 11FF00B0, 1F01 (r1 SiS 630 1000 MSFT 100000A)
[ 0.000000] ACPI: FACS 11FF8000, 0040
[ 0.000000] ACPI: BIOS age (1997) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 12000000:edef0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 73137
[ 0.000000] Kernel command line: root=UUID=efcd7c65-62ff-46cc-94eb-50f5621e744f ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (01243000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 751.718 MHz processor.
[ 42.170197] Console: colour VGA+ 80x25
[ 42.170222] console [tty0] enabled
[ 42.173202] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 42.176990] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.224980] Memory: 238724k/294848k available (2079k kernel code, 55508k reserved, 965k data, 364k init, 0k highmem)
[ 42.225007] virtual kernel memory layout:
[ 42.225010] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 42.225014] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 42.225018] vmalloc : 0xd2800000 - 0xff7fe000 ( 719 MB)
[ 42.225022] lowmem : 0xc0000000 - 0xd1ff0000 ( 287 MB)
[ 42.225025] .init : 0xc03fc000 - 0xc0457000 ( 364 kB)
[ 42.225029] .data : 0xc0307d94 - 0xc03f93a4 ( 965 kB)
[ 42.225033] .text : 0xc0100000 - 0xc0307d94 (2079 kB)
[ 42.225042] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 42.225230] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 42.305266] Calibrating delay using timer specific routine.. 1504.51 BogoMIPS (lpj=3009034)
[ 42.305392] Security Framework initialized
[ 42.305434] SELinux: Disabled at boot.
[ 42.305482] AppArmor: AppArmor initialized
[ 42.305495] Failure registering capabilities with primary security module.
[ 42.305519] Mount-cache hash table entries: 512
[ 42.306010] Initializing cgroup subsys ns
[ 42.306030] Initializing cgroup subsys cpuacct
[ 42.306058] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 42.306091] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 42.306097] CPU: L2 cache: 256K
[ 42.306109] CPU serial number disabled.
[ 42.306117] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 42.306157] Compat vDSO mapped to ffffe000.
[ 42.306203] CPU: Intel Pentium III (Coppermine) stepping 03
[ 42.306222] Checking 'hlt' instruction... OK.
[ 42.325025] Freeing SMP alternatives: 0k freed
[ 42.325571] Early unpacking initramfs... done
[ 49.546210] net_namespace: 64 bytes
[ 49.546265] Booting paravirtualized kernel on bare hardware
[ 49.548061] Time: 12:59:52 Date: 08/23/08
[ 49.548293] NET: Registered protocol family 16
[ 49.549237] EISA bus registered
[ 49.578056] PCI: PCI BIOS revision 2.10 entry at 0xfd9f8, last bus=1
[ 49.578068] PCI: Using configuration type 1
[ 49.578129] Setting up standard PCI resources
[ 49.603535] ACPI: Interpreter disabled.
[ 49.603559] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 49.603696] pnp: PnP ACPI: disabled
[ 49.603713] PnPBIOS: Scanning system for PnP BIOS support...
[ 49.603855] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7000
[ 49.603864] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5dd4, dseg 0xf0000
[ 49.606045] PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
[ 49.606959] PCI: Probing PCI hardware
[ 49.606973] PCI: Probing PCI hardware (bus 00)
[ 49.609985] PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0
[ 49.616765] NET: Registered protocol family 8
[ 49.616776] NET: Registered protocol family 20
[ 49.617157] AppArmor: AppArmor Filesystem Enabled
[ 49.617310] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 49.617319] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 49.617328] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 49.617336] system 00:00: iomem range 0x100000-0x11feffff could not be reserved
[ 49.617345] system 00:00: iomem range 0x11ff0000-0x11ff7fff could not be reserved
[ 49.617353] system 00:00: iomem range 0x11ff8000-0x11ffffff could not be reserved
[ 49.617363] system 00:00: iomem range 0xffef0000-0xffefffff could not be reserved
[ 49.617372] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 49.618853] PCI: Bridge: 0000:00:02.0
[ 49.618865] IO window: c000-cfff
[ 49.618879] MEM window: efe00000-efefffff
[ 49.618888] PREFETCH window: dfc00000-efcfffff
[ 49.618920] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 49.618979] NET: Registered protocol family 2
[ 49.620431] Time: tsc clocksource has been installed.
[ 49.652703] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 49.653562] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 49.654855] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 49.655479] TCP: Hash tables configured (established 16384 bind 16384)
[ 49.655488] TCP reno registered
[ 49.665222] checking if image is initramfs... it is
[ 62.921773] Freeing initrd memory: 48955k freed
[ 62.924831] audit: initializing netlink socket (disabled)
[ 62.924929] audit(1219496405.705:1): initialized
[ 62.932466] VFS: Disk quotas dquot_6.5.1
[ 62.932594] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 62.933705] io scheduler noop registered
[ 62.933721] io scheduler anticipatory registered
[ 62.933727] io scheduler deadline registered
[ 62.933783] io scheduler cfq registered (default)
[ 62.933905] Boot video device is 0000:01:00.0
[ 62.935007] isapnp: Scanning for PnP cards...
[ 63.288680] isapnp: No Plug & Play device found
[ 63.418038] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 63.418353] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 63.420989] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 63.424055] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 63.424323] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 63.424694] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 63.424704] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 63.425223] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 63.435044] mice: PS/2 mouse device common for all mice
[ 63.435476] EISA: Probing bus 0 at eisa.0
[ 63.435520] Cannot allocate resource for EISA slot 5
[ 63.435540] EISA: Detected 0 cards.
[ 63.435553] cpuidle: using governor ladder
[ 63.436190] NET: Registered protocol family 1
[ 63.436317] Using IPI Shortcut mode
[ 63.436491] registered taskstats version 1
[ 63.436800] Magic number: 4:455:987
[ 63.436836] hash matches device ttyd0
[ 63.437188] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 63.437195] EDD information not available.
[ 63.440973] Freeing unused kernel memory: 364k freed
[ 63.458633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 65.331922] fuse init (API version 7.9)
[ 65.432672] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 65.524257] device-mapper: uevent: version 1.0.3
[ 65.524488] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 65.634763] md: linear personality registered for level -1
[ 65.659595] md: multipath personality registered for level -4
[ 65.685431] md: raid0 personality registered for level 0
[ 65.715672] md: raid1 personality registered for level 1
[ 65.739706] xor: automatically using best checksumming function: pIII_sse
[ 65.758522] pIII_sse : 1488.000 MB/sec
[ 65.758530] xor: using function: pIII_sse (1488.000 MB/sec)
[ 65.766061] async_tx: api initialized (async)
[ 65.894545] raid6: int32x1 232 MB/s
[ 65.962625] raid6: int32x2 264 MB/s
[ 66.030750] raid6: int32x4 214 MB/s
[ 66.098635] raid6: int32x8 204 MB/s
[ 66.166553] raid6: mmxx1 659 MB/s
[ 66.234514] raid6: mmxx2 850 MB/s
[ 66.302551] raid6: sse1x1 581 MB/s
[ 66.370454] raid6: sse1x2 839 MB/s
[ 66.370460] raid6: using algorithm sse1x2 (839 MB/s)
[ 66.370476] md: raid6 personality registered for level 6
[ 66.370482] md: raid5 personality registered for level 5
[ 66.370487] md: raid4 personality registered for level 4
[ 66.488477] md: raid10 personality registered for level 10
[ 67.991926] sis900.c: v1.08.10 Apr. 2 2006
[ 68.035169] PCI: setting IRQ 11 as level-triggered
[ 68.035195] PCI: Found IRQ 11 for device 0000:00:01.1
[ 68.035236] PCI: Sharing IRQ 11 with 0000:00:0f.1
[ 68.036125] 0000:00:01.1: SiS 900 Internal MII PHY transceiver found at address 1.
[ 68.044611] 0000:00:01.1: Using transceiver found at address 1 as default
[ 68.047577] eth0: SiS 900 PCI Fast Ethernet at 0xde00, IRQ 11, 00:d0:09:b6:31:d8
[ 68.050538] SCSI subsystem initialized
[ 68.351418] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 68.379540] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 68.379574] 8139cp 0000:00:0b.0: Try the "8139too" driver instead.
[ 68.441209] usbcore: registered new interface driver usbfs
[ 68.441347] usbcore: registered new interface driver hub
[ 68.470476] usbcore: registered new device driver usb
[ 68.582004] 8139too Fast Ethernet driver 0.9.28
[ 68.582378] PCI: setting IRQ 10 as level-triggered
[ 68.582387] PCI: Found IRQ 10 for device 0000:00:0b.0
[ 68.593589] PCI: Sharing IRQ 10 with 0000:00:01.3
[ 68.593617] PCI: Sharing IRQ 10 with 0000:00:01.2
[ 68.595036] eth1: RealTek RTL8139 at 0xdc00, 00:e0:7d:02:46:eb, IRQ 10
[ 68.595047] eth1: Identified 8139 chip type 'RTL-8139A'
[ 68.595324] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 68.595435] PCI: Found IRQ 10 for device 0000:00:01.2
[ 68.595451] PCI: Sharing IRQ 10 with 0000:00:01.3
[ 68.595461] PCI: Sharing IRQ 10 with 0000:00:0b.0
[ 68.595501] ohci_hcd 0000:00:01.2: OHCI Host Controller
[ 68.596767] ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 68.596837] ohci_hcd 0000:00:01.2: irq 10, io mem 0xf3ffe000
[ 68.611305] Floppy drive(s): fd0 is 1.44M
[ 68.630444] FDC 0 is a post-1991 82077
[ 68.630545] libata version 3.00 loaded.
[ 68.652838] usb usb1: configuration #1 chosen from 1 choice
[ 68.652941] hub 1-0:1.0: USB hub found
[ 68.652974] hub 1-0:1.0: 3 ports detected
[ 68.754823] PCI: Found IRQ 10 for device 0000:00:01.3
[ 68.754860] PCI: Sharing IRQ 10 with 0000:00:01.2
[ 68.754871] PCI: Sharing IRQ 10 with 0000:00:0b.0
[ 68.754937] ohci_hcd 0000:00:01.3: OHCI Host Controller
[ 68.755057] ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
[ 68.755125] ohci_hcd 0000:00:01.3: irq 10, io mem 0xf3fff000
[ 68.812798] usb usb2: configuration #1 chosen from 1 choice
[ 68.812916] hub 2-0:1.0: USB hub found
[ 68.812950] hub 2-0:1.0: 2 ports detected
[ 68.952265] pata_sis 0000:00:00.1: version 0.5.2
[ 68.957791] scsi0 : pata_sis
[ 68.962279] scsi1 : pata_sis
[ 68.962539] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 68.962548] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 69.126915] ata1.00: ATA-6: Maxtor 93073U4, BAC51JJ0, max UDMA/66
[ 69.126940] ata1.00: 60030432 sectors, multi 16: LBA
[ 69.143984] ata1.00: configured for UDMA/66
[ 69.218336] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 69.434713] usb 2-1: configuration #1 chosen from 1 choice
[ 69.463853] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-252S, R950, max UDMA/33
[ 69.634563] ata2.01: configured for UDMA/33
[ 69.635178] scsi 0:0:0:0: Direct-Access ATA Maxtor 93073U4 BAC5 PQ: 0 ANSI: 5
[ 69.636619] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-252S R950 PQ: 0 ANSI: 5
[ 71.536029] Driver 'sd' needs updating - please use bus_type methods
[ 71.547318] sd 0:0:0:0: [sda] 60030432 512-byte hardware sectors (30736 MB)
[ 71.547395] sd 0:0:0:0: [sda] Write Protect is off
[ 71.547405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 71.547466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 71.547774] sd 0:0:0:0: [sda] 60030432 512-byte hardware sectors (30736 MB)
[ 71.547806] sd 0:0:0:0: [sda] Write Protect is off
[ 71.547813] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 71.547862] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 71.547880] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 71.611949] usbcore: registered new interface driver hiddev
[ 71.620668] sda5 >
[ 71.621111] sd 0:0:0:0: [sda] Attached SCSI disk
[ 71.647470] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 71.647733] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 71.650045] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:01.3/usb2/2-1/2-1:1.0/input/input2
[ 71.652932] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 71.652967] Uniform CD-ROM driver Revision: 3.20
[ 71.653262] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 71.669444] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:01.3-1
[ 71.669530] usbcore: registered new interface driver usbhid
[ 71.669544] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 72.378789] kjournald starting. Commit interval 5 seconds
[ 72.378882] EXT3-fs: mounted filesystem with ordered data mode.
[ 84.394909] Linux agpgart interface v0.102
[ 84.476705] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 84.612512] agpgart: Detected SiS chipset - id:1584
[ 84.732336] agpgart: AGP aperture is 64M @ 0xf4000000
[ 84.880792] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 85.278254] Real Time Clock Driver v1.12ac
[ 85.301836] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 86.702224] eth0: Media Link Off
[ 86.732029] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 87.080224] parport_pc 00:0a: reported by Plug and Play BIOS
[ 87.080320] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 87.962755] NET: Registered protocol family 17
[ 95.353877] lp0: using parport0 (interrupt-driven).
[ 95.860509] Adding 835340k swap on /dev/sda5. Priority:-1 extents:1 across:835340k
[ 96.542201] EXT3 FS on sda1, internal journal
[ 97.611617] NET: Registered protocol family 10
[ 97.612518] lo: Disabled Privacy Extensions
[ 97.613807] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 99.466179] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 106.421179] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 106.421399] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 106.422004] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 106.422200] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 107.841613] eth1: no IPv6 routers present
[ 112.760207] [drm] Initialized drm 1.1.0 20060810
[ 112.830772] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 112.831130] [drm] Initialized sis 1.3.0 20070626 on minor 0
[ 112.835486] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 112.835554] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 112.835596] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 117.357609] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 117.846720] ppdev: user-space parallel port driver
[ 118.974658] audit(1219496461.965:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4942 profile="/usr/sbin/cupsd" namespace="default"
root@gpersua-desktop:~#

Esta es la info de mi tarjeta de audio, les agradezco si me pueden ayudar

root@gpersua-desktop:~# lspci|grep audio
00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
root@gpersua-desktop:~#
Responder

Reenviar